Metallography Mounting Press

Product Details:

Application

This machine is designed for purpose of the last process before polishing. It is setting up those small, difficult-to-hold or irregular specimens for metallographical test. It can facilitate polishing and watch properly the ideal material structure and measure the hardness of the material by hardness tester. The inserts for this machine are limited to thermosetting materials only .The punching temperature of different thermosetting materials can be adjusted depending upon the features of materials .

The inserts are available from the sales agency of our company.

Technical Paramenters

Product Details:

Application

ZXQ-2 is suitable for tiny or irregular metallorgraphic, lithofacies specimen to be mouted so that the sample will be cut or grinded and polished, and then metallography, spectral measurement or hardness testing. This, machine adopts 7’’big LCD screen display, which has the function of real-time temperature, holding time, cooling temperature. The complete process which is heating, constant pressure, cooling and sample preparation is controlled bu the CPU. The equipment can automatically press, heat and set the temperature condition in a minute. It is easy for us to operate the equipment with the stop button. After the sample preparation, the equipment may show prompt alarm and automatic pressure relief, automatic cooling, which can achieve the idea effect. It is one necessary equipment in laboratory of colleges, research institutes and factories.

Technical Paramenters

Product Details:

Description

This machine's optimized heating and cooling system makes the setting time extremely short. And all processes from heating, holding, holding, cooling and unloading are done automatically with one click.

Technology Parameter

Product Details:

Description

This machine's optimized heating and cooling system makes the setting time extremely short. And all processes from heating, holding, holding, cooling and unloading are done automatically with one click.

Technology Parameter

Product Details:

AUTOMATIC SPECIMEN MOUNTING PRESS

This Machine is Automatic Mounting Press for metallographic specimen. It is suitable for all Thermosetting Materials, because of the cooling system. It can automatically finish with the heating temperature, the holding time and acting force. The operator can change 4 specification patterns according to the difficult specimens. It can make 2 specimens at one time.

*SPECIFICATION:

Pattern specimen : Φ25mm, Φ30mm, Φ40mm, Φ50mm

Power: 220V 50Hz

Maximum consumption: 1800W

Pressure: 0~2Mpa

Temperature: 0~300°C

Holding time: 0~99minutes and 99 seconds

Out line dimension: 615 x 510x 500mm

Weight: 110Kg

Cooling: Water cooling

Additional Information:

• Item Code: AUTO-50

Product Details:

AUTOMATIC MOUNTING PRESS is a mechanical type machine. By turning the hand-wheel of the machine, a couple of bevelgear is rotated to drive the screw rod which in turn pushes/pulls the lower die up and down along the mould sleeve. The thermo set plastics together with specimen being mounted is formed under heated conditions. During this process the pressure is self adjusted by a spring fixed inside the machine. A Signal light is used to indicate the pressure level.

SPECIFICATION:

Ø Specimen Pressing Size: Ø 22x25mm, Ø 30x25mm, Ø 45x25mm

Ø Heater Capacity: 650W 220V

Ø Adjustable Temperature Range: 0-400ºC

Ø
Power: 15% 220V 50Hz voltage fluctuation less than + 15%

Ø Overall Dimensions: 340mm X 270mm X 400mm

Ø Weight: 25kg (approx)

Additional Information:

• Item Code: DM-2BSERIES

Product Details:

Technical Data:-

Operation :- Manually by plunger.

Sample Operation :- At a time single operation can done.

Heating Element :- 750 watt.

Hydraulic Jack :- Capacity 6-8 ton

Digital Controller :- 0-300.degress

Dimensions :- 300mm W x 350mm D x 750mm H. (Approx.).

Weight :- 80-120 Kg. (Approx.)

Product Details:

The machine consists of a vacuum chamber, an indexing assembly, a fuselage assembly, a feed assembly, and a vacuum pump. This model can realize multi-sample setting, which can be quickly converted between each station to improve work efficiency.

Technical indicators: