Models | DM-1000ZDT |
Testing Force | 10g(0.098N)???25g (0.245N)???50g (0.49N)???100g (0.98N )???200g (1.96N)???300g (2.94N)???500g (4.9N)???1000g(9.8N) |
Scale | HV0.01???HV0.025???HV0.05???HV0.1???HV0.2???HV0.3???HV0.5???HV1???HV2 |
Min. Measuring Unit | 0.015μm |
Hardness Value Rang | 1HV-4000HV |
Hardness Value of Reading | Digital LCD Screen |
Total Magnification of Microscope | 100X???For Observation??????400X???For Measurement??? (Can be extended to 200X or 600X) |
Loading Method | Automatically (Load, dwell and unload the testing force??? |
Duration Time | 1-99s |
Switch Type of Objective lens and Indenter | Auto Turret (Objective Lenses-Indentor-Objective Lenses switching Automatically) |
Specimen Allowing Maximum Height | 85mm |
Distance from Indenter Center to Fuselage | 120mm |
Overall Dimension | 490×185×515mm???L×W×H??? |
Net Weight | 45kg |
Light Source | LED Cold light source (can be continuous use for 24 hours, no heat generated, servicing life can reach 100,000 hours??? |
Power Supply | 110V/220V + 5%, 50/60 Hz |
X-Y Testing Table | Dim.:100×100 mm, Max. Travel Range: 25×25mm, Moving Resolution Ratio: 0.01mm |
Data Output | Built-in Printer???Hardness Value, The Max. And Min. Value, Testing times and Average Value??? Built-in RS-232 interface |
Standard Accessories | 1 piece: 10X micrometer eyepiece; 10X and 40X objective lens; Vickers indenter; X-Y Testing Table; Flat Fixture; Small Parts Fixture; Water level; Power line; Dust cover; Instruction Book; Hardness Conversion Tables;Accessory case 2 pieces: |
Additional Information:
Product Details:
Display Type | LCD |
Automation Grade | Automatic |
Weight | 40kg |
Power | 220V, 50/60Hz |
I Deal In | New Only |
Dimensions | 530 x 290 x 490mm |
Product features
??? Manual turret, high-precision potical measuring systems, precision coordinate test sets.
??? Experimental process automation, simple operation, no thought operator error.
??? Frictionless loading shaft, high precision testing force, optional CCD imaging device and image processing system.
??? Optional Knoop indenter Knoop hardness test performed.
??? Manual data input, LCD automatically displays the hardness value
??? Hardness conversion between different hardness scales
??? Precision conforms to GB/T 4340.2, ISO 6507-2 and ASTM E384
Application
It can be used to determine the Vickers hardness of steel, non-ferrous metals, ceramics, treated layers of metal surface, and the hardness grads of carburized, nitrided and hardened layers of metals. It is also suitable to determine the Vickers hardness of micro and super thin parts.
Specification
Measuring range:5-3000HV
Power supply: 220V, 50/60Hz
Test force: 0.09807, 0.2452, 0.4904, 0.9807, 1.961, 2.942, 4.904, 9.807N (10, 25, 50, 100, 200, 300, 500, 1000gf)
Max. height of test piece: 90mm
Depth of Throat:120mm
Magnifications of the measuring system: 400X,100X
Dimensions: 530 x 290 x 490mm
Weight: 40kg
Standard accessorie
1.Coordinate anvil\Thin shaft anvil\Thin plate anvil\Flat nose pliers\Large
2.V-notch anvil\Small V-notch anvil: 1 pc.
3.Micro-Vickers standardized block: 2 pcs.
4.Diamond pyramid penetrator: 1 pc.
Additional Information:
Type | DM-1000DTM |
Test force | 10g (0.098N), 25g (0.245N), 50g (0.49N), 100g (0.98N), 200g (1.96N), 300g (2.94N), 500g (4.9N), 1000g (9.8N) |
Rulers | HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1, HV2 |
Minimum measurement unit | 0.25μm |
Measuring the hardness range | 1HV-4000HV |
Hardness value read | Digital LCD |
Total magnification | 100X (observed), 400X (measurement) (Expandable up to 200X or 600X) |
Loading mode | FULLY AUTOMATIC (loading, dwell, unloading) |
Holding Time | 1-99 seconds |
The objective lens and the press head switch | Manual Turret |
Specimen allows a maximum height | 85mm |
Indenter center to wall distance | 110mm |
Instrument Size | 405 × 290 × 480mm (L × W × H) |
Instrument Weight | 45kg |
Light source | LED cold light source (continuous 24-hour use life of up to 100,000 hours) |
Power supply | 110V/220V + 5%, 50/60 Hz |
XY table | Dimensions: 100 × 100 mm, the largest mobile: 25 × 25mm Minimum reading: 0.01mm (Optional digital XY table, LCD digital display) |
Data Output | Built-in printer (hardness values, maximum and minimum test time, the number of tests, the average) Built-in RS-232 interface |
Standard fittings, accessories | 10X eyepiece micrometer a Vickers indenter a 10X and 40X objective lens of each one, and two standard hardness block, XY table, flat fixture, sheet fixtures, small parts jig a leveling screw four a bubble level, the power cord is a dust cover a manual, hardness conversion tables, certificate, warranty card, accessory case a |
Additional Information:
Type | DM-1000DTA |
Test force | 10g (0.098N), 25g (0.245N), 50g (0.49N), 100g (0.98N), 200g (1.96N), 300g (2.94N), 500g (4.9N), 1000g (9.8N) |
Rulers | HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1, HV2 |
Minimum measurement unit | 0.25μm |
Measuring the hardness range | 1HV-4000HV |
Hardness value read | Digital LCD |
Total magnification | 100X (observed), 400X (measurement) (Expandable up to 200X or 600X) |
Loading mode | FULLY AUTOMATIC (loading, dwell, unloading) |
Holding Time | 1-99 seconds |
The objective lens and the press head switch | Manual Turret |
Specimen allows a maximum height | 85mm |
Indenter center to wall distance | 110mm |
Instrument Size | 405 × 290 × 480mm (L × W × H) |
Instrument Weight | 45kg |
Light source | LED cold light source (continuous 24-hour use life of up to 100,000 hours) |
Power supply | 110V/220V + 5%, 50/60 Hz |
XY table | Dimensions: 100 × 100 mm, the largest mobile: 25 × 25mm Minimum reading: 0.01mm (Optional digital XY table, LCD digital display) |
Data Output | Built-in printer (hardness values, maximum and minimum test time, the number of tests, the average) Built-in RS-232 interface |
Standard fittings, accessories | 10X eyepiece micrometer a Vickers indenter a 10X and 40X objective lens of each one, and two standard hardness block, XY table, flat fixture, sheet fixtures, small parts jig a leveling screw four a bubble level, the power cord is a dust cover a manual, hardness conversion tables, certificate, warranty card, accessory case a |
Additional Information:
Models | DM-1000ZDTA |
Testing Force | 10g(0.098N)???25g (0.245N)???50g (0.49N)???100g (0.98N )???200g (1.96N)???300g (2.94N)???500g (4.9N)???1000g(9.8N) |
Scale | HV0.01???HV0.025???HV0.05???HV0.1???HV0.2???HV0.3???HV0.5???HV1???HV2 |
Min. Measuring Unit | 0.01μm |
Hardness Value Rang | 1HV-4000HV |
Hardness Value of Reading | Digital LCD Screen |
Total Magnification of Microscope | 100X???For Observation??????400X???For Measurement??? (Can be extended to 200X or 600X) |
Loading Method | Automatically (Load, dwell and unload the testing force??? |
Duration Time | 1-99s |
Switch Type of Objective lens and Indenter | Auto Turret (Objective Lenses-Indentor-Objective Lenses switching Automatically) |
Specimen Allowing Maximum Height | 85mm |
Distance from Indenter Center to Fuselage | 120mm |
Overall Dimension | 490×185×515mm???L×W×H??? |
Net Weight | 45kg |
Light Source | LED Cold light source (can be continuous use for 24 hours, no heat generated, servicing life can reach 100,000 hours??? |
Power Supply | 110V/220V + 5%, 50/60 Hz |
X-Y Testing Table | Dim.:100×100 mm, Max. Travel Range: 25×25mm, Moving Resolution Ratio: 0.01mm |
Data Output | Built-in Printer???Hardness Value, The Max. And Min. Value, Testing times and Average Value??? Built-in RS-232 interface |
Standard Accessories | 1 piece: 10X micrometer eyepiece; 10X and 40X objective lens; Vickers indenter; X-Y Testing Table; Flat Fixture; Small Parts Fixture; Water level; Power line; Dust cover; Instruction Book; Hardness Conversion Tables;Accessory case 2 pieces: |
Additional Information:
4/5
Reviewed by 8 Users
Most Relevant Reviews